What should be paid attention to when installing the plate and frame automatic filter press?

When installing the plate and frame automatic filter press, the following aspects should be paid attention:

1. There should be sufficient operation and maintenance space around the plate and frame automatic filter press. The hydraulic pressure filter press should choose a suitable position to place the hydraulic station to ensure that the hydraulic station can work normally.

2. Place the filter plate according to the work requirements, and arrange the feeding, washing and drainage pipes. It is equipped with filter pressure indicator and return channel to control filter pressure. If the diaphragm is squeezed, arrange the compressed air line.

3. Hydraulic filter, inject clean 20#-40# hydraulic mechanical oil into the oil tank of the hydraulic station, and the operating temperature is>-5 ℃; if the ambient temperature is low, hydraulic oil with similar viscosity and lower condensation point can be selected. The hydraulic oil must pass 80-

Add a 100 mesh screen.

4. The plate and frame automatic filter press shall be installed on the flat concrete foundation. The foot of the pusher at the feed end is fixed on the foundation with anchor bolts; the support end does not need anchor bolts, or is locked with two nuts, and the nuts are padded after the anchor bolts are positioned.

Appropriate gap between the seat to leave the appropriate gap, this foot can be micro-telescopic. Before positioning, the installer should align the perpendicularity of the beam with the large plane of the thrust plate.

5. Machine equipment or hydraulic pressing device, turn on the power to start the motor should be working correctly. When the hydraulic pressure is pressed and pressurized, the pressure gauge should rise steadily, and the hydraulic system should have no leakage phenomenon. The working pressure of the hydraulic station should be adjusted correctly according to the model and size.

If it is found that the oil storage tank is insufficient, it must be replenished after the test.

6. The foundation structure shall be designed by the construction personnel according to the load of the equipment, and the anchor bolts shall be grouted twice to reserve holes.

After completing the above operations, as long as you pay attention to the maintenance of the filter press in daily use, you can ensure the working status and efficiency of the plate and frame automatic filter press.